Window Cleaning Tips for Glass Windows with Streaks
Have you gotten into so many experiments for window cleaning soaps, detergents, liquids, and tools but never experienced satisfying results? Have you wasted too much money, time, and effort asking colleagues about the window cleaning problems you are experiencing but failed on getting the right information and effective solutions from their suggestions? The fact is you missed out the right, appropriate, and guaranteed window cleaning tips.
People, who deal with window cleaning whether commercial or household, often encounter various difficulties from wiping out droplet remnants to getting off severe streaks and scratches. To get you out of that long hated glass window full of flaws, follow these 20 Savvy Window Cleaning Tips that can get you out of desperation in getting the job done with shimmer.
20 Savvy Window Cleaning Tips You Shouldn’t Miss
- Get Prepared. Before starting to clean glass windows, make sure to prepare everything. Your tools, cleaning materials, and other necessary equipment in order to make an ideal task for the day and be able to finish it efficiently.
- Carry a small sharp razor blade for bird muck and sticky tape remnants etc.
- Start cleaning from the inside. The outer side of your window will make your tools dirtier than the inside. When cleaning from the inside, place an old towel underneath the window to catch drips.
- Wash one side of the window with horizontal strokes and the other side with vertical so you can pinpoint which side have streaks. You can eliminate scratches on windows with toothpaste.
- Use squeegees on a long handle to prevent streaks on large windows.
- Invest good-quality tools such as squeegees and window cleaning tool belt and bucket. A few extra dollars up front will save plenty of time and frustration. Purchase a squeegee with the size of your smallest window. You’ll realize the advantage when you get to use it.
- Store homemade window washing solution in inexpensive plastic spray bottles. Add a couple of drops of blue, red or green food coloring to signify that it is a cleaner for glass and windows. Adding a label will be helpful to avoid accidental intake of cleaning solutions. It would also be advisable if you store your cleaning materials in a place where toddlers can’t go.
- Use both hands as you work. It would make the task a lot easier and faster if you manipulate tools with both hands.
- Slightly miss the top frame as you apply the solution to avoid water runs.
- Avoid using too much water unless the windows are extremely dirty or hot. Too much water may lead to a messy workplace especially if you are cleaning the inside of your window.
- On windy days work in the same direction as the wind to avoid spray landing on clean windows.
- Use a good quality detergent. It’s worth trying out solutions designed specifically for window cleaning.
- Make use of microfiber cloths. There are various cloths that are suitable for those kinds of windows. Make sure that you have picked the right cloth before you use it so that you will have good results.
- Finish with the squeegee blade horizontally at the bottom edge of the window frame rather than vertically against the side of the frame. This way, you would not let the left debris stagnant at the bottom edge of your window. You would be able to remove those by making a horizontal finishing touch of your squeegee right at the bottom.
- Don’t use a good rubber blade to run over window sills. It might get ruined.
- Change rubber blades frequently. Every week if necessary.
- Tap the squeegee blade on the window to remove excess water. It’s quicker than wiping it. In some instance, there might be some strands that may get into your squeegee, pull it with your fingers rather than anything else and ensure that there is nothing more to get streaks on the glass that you’re working on.
- Hold hand tools such as the mop and blade loosely with the thumb pointing upwards. This will give your wrist free movement and will make your hands even more relaxed and effective as you finish your work.
- The rubber blade should run sharp on the window to ensure this doesn’t press on too hard or the rubber will bend and create a dull edge.
- Lastly, Practice makes perfect.
